The screen replacement doesn’t fix the problem of iPhone 6 and 6 Plus’s display aberrations and inconsistent touch.
The problems with the 2014 iPhone 6 and 6 Plus generally start with a small patterned band at the top of the screen of afflicted devices, according to the Apple community support forums. As time goes on, the aberrant band sometimes extends further down the screen, and touch sensitivity and device response to the touch gets progressively worse.
iFixit has collated reports from component-level repair shops from around the U.S. that have seen the problem. One vendor claims to repair about 100 iPhone 6 and 6 Plus models a month exhibiting the problem. Others report dozens.
AppleInsider has spoken with a screen repair chain that performs repairs on about a thousand devices a week that confirmed seeing the problem, with “a few [iPhones] a week” that enter the shops exhibiting the issue.
Third party repair shops have traced the problem to the chips that translate the user’s touch to information the iPhone can use. These controller chips are sometimes failing outright, and in other cases the microscopic solder joints connecting each chip to the motherboard are breaking, causing the progressive failures.
While a single root cause of the problem has yet to be determined, the problem may be related to the “Bendgate” issue from 2015, where the large and thin iPhones were warping as a result of force applied by users. The increased incidence of flexing of the case because of the larger surface area may be exacerbating the problem over time, and causing more solder joints to break.
Apple may have been aware of the potential for a problem with the touch controller when it designed the iPhone 6s family. The touch controller has been moved to the display assembly. In conjunction with overall frame strengthening, the migration appears to be protecting the controller chips’ solder joints from the flexes the iPhone 6 endures because of its size.
Prior to the iPhone 6, the touch controller chips were reinforced by a metal electromagnetic interference shield as well, protecting older phones from the same problem.
Apple’s solution at this time is to replace a device that has failed in such a fashion. Third party non-warranty repair shops specializing in micro-soldering can replace the touch controllers that are failing as well, but this invalidates any Apple warranty.